Adexen is a Global Human Resources Providing Business Services in Europe and Africa - Our customer, an international oil & gas group, is recruiting suitably qualified candidates to fill the positions below:
Job Title: Technician Instrumentation
Reference Job: 1345
Location: Nigeria
Function: Technical / technicians
Description Job
- To ensure safety of commissioning activities on yard and on site, by performing activities in respect with Company standing instruction and Work Permit instructions.
- To ensure that the work identified in the work permit is performed according to company specification
- Performed by the commissioning operations (test and check sheets).
- Report any non-conformity to its Supervisor
- Ensure that the Company's HSE regulations are respected (especially procedures related to Work Permits)
- Witnessing of contractor pre-commissioning activities as defined by the supervisor.
- Raise and clear punch List items
- Reporting and progress follow up
- Report daily activities to the supervisor
- Minimum Qualification: Technician
- Education Level: High School or Higher National Diploma or Certificate
- Experience: 2-5 years in a similar position
- English / Commissioning / Instrumentation & Loop testing / Instrument tools: HART communicator, Druck pump
- ICAPS / OPERCOM
- Computer: Be able to produce a report using Microsoft Word; be able to perform simple calculation with Microsoft Excel. Have been introduced to the use of the internet and e-mails.
- Petroleum: Have a basic understanding of facilities / process (from well to export). Be aware of behavioral hydrocarbons and associated hazards (explosion, asphyxia ...).
- Physics: Understanding and use of basic laws and units of physic (temperature, pressure, volume, density, specific gravity ...).
- Be able to read and use drawings (P & ID's, ESD matrix and loop diagrams), vendor documents, name name, datasheets. Be knowledgeable of instrument symbols.
- Understand basic regulations and be able to analyze them (differentiation between cascade, split range, simple).
- Have a basic understanding of PCS, F & G, and ESD systems. Understand inhibit, alarm and trip concepts.
- Understand working principle of basic instruments: level and interface level transmitters, thermocouples, manometers, vibration probes, metering devices (flat orifice, coriolis, turbine, volumetric) ...
- Correct use and handling of tubing, compression fittings, gaskets, "O" rings, grid cable ...
- Understand manual and automatic valves (including PSV) principle and command (positioner ...).
- Be familiar with all types of F & G detection (loop fuse, UV / IR, gas, smoke);
- Know how to select and use the necessary hand tools.
- Correct use and handling of multimeters, calibration unit, pump hydraulic, temperature bath, smart calibrator.
Click Here to Apply for this Position
Job Title: Mechanical Supervisor (Engineer)
Reference Job: 1346
Location: Nigeria
Industry: Energy / Oil & Gas
Function: Operations & Production
Summary
Adexen Recruitment is mandated by an International Oil & Gas group to recruit a Punch List Coordinator for an offshore project.
Description Job
- To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
- To ensure that the work identified in the work permit is performed according to company specification.
- Take care for the organization of the work such as Logistic, tools, spare parts, authorization.
- I charge to supervise the yard and execution site as described in the Work permit. Make sure that:
- The risks and safety precautions highlighted in the work permit are well understood by his team,
- Check the place for any additional risks not identified in the work permit and report to its superintendent any hazardous deviation,
- Perform pre-job meeting, check that the tools and EPP are in good condition,
- Check that all required permissions to perform the job are granted,
- Ensure that Company Standing instruction, Operating Operating Site, and additional operating procedure such as SIMOPS are known by the team and enforced,
- Ensure that cleaning is done after completion of the work and the place is left safe.
- Has full authority to stop the job of any member of his team in case of hazardous situation or unsafe behavior.
- Stop any hazardous situation and immediately report to the RSES website.
- Supervise the Witnessing of contractor pre-commissioning activities by its team of technicians, as defined by the superintendent. Ensure that the witnessing is made in a professional way; evaluate the skills of the people doing the pre-commissioning. Make sure that witnessing activities do not delay contractor activities more than necessary.
- Manage a small team of technicians to ensure that the work identified in the WP is performed in a professional way, in respect with company specification.
- Evaluate technical skills of his team members and help them to develop their skills on new equipment and technologies
- Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, permissions, spare parts, documents ...
- Raise and clear punch List items. Report any nonconformity to his superintendent.
- Validate Commissioning test and check sheets before superintendent approval.
- Verifies the quality of its teams' interventions by frequent on-site checks
- Report daily activities to the superintendent.
- Minimum Qualification: Engineer
- Education Level: Master's degree or Higher National Diploma
- Experience: 5-10 years in a similar position
- Mandatory Competencies: English / Mechanical Engineering / Oil & Gas Process
- Recommended Competencies: ICAPS / OPERCOM / Commissioning
Click Here to Apply for this Position
Job Title: Process Supervisor (Engineer)
Reference Job: 1348
Location: Nigeria
Industry: Energy / Oil & Gas
Function: Operations & Production
Summary
Our client is recruiting a Process Supervisor for an Oil & Gas offshore project.
Description Job
- To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
- To ensure that the work identified in the work permit is performed according to company specification.
- Take care for the organization of the work such as Logistic, tools, spare parts, authorization ...
- I charge to supervise the yard and execution site as described in the Work permit. Make sure that:
- The risks and safety precautions highlighted in the work permit are well understood by his team,
- Check the place for any additional risks not identified in the work permit and report to its superintendent any hazardous deviation,
- Perform pre-job meeting, check that the tools and EPP are in good condition,
- Check that all required permissions to perform the job are granted,
- Ensure that Company Standing instruction, Operating Operating Site, and additional operating procedure such as SIMOPS are known by the team and enforced,
- Ensure that cleaning is done after completion of the work and the place is left safe.
- Has full authority to stop the job of any personnel under his work permit in case of hazardous situation or unsafe behavior.
- Stop any hazardous situation occurring around and immediately report to the RSES site.
- Supervise the Witnessing of contractor pre-commissioning activities by its team of technicians, as defined by the superintendent.
- Ensure that the witnessing is made in a professional way; evaluate the skills of the people doing the pre-commissioning.
- Make sure that witnessing activities do not delay contractor activities more than necessary.
- Manage the team of Contractor's technicians and leak test specialists to ensure that the work identified in the WP is performed in a professional way, in respect with company specification.
- Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, permissions, spare parts, documents ...
- Raise and clear punch List items. Report any non-conformity to the discipline leader
- Validate Commissioning test and check sheets before superintendent approval.
- Verifies the quality of its teams' interventions by frequent on-site checks
- Report daily activities to the superintendent.
- Follow-up the progress of each piping test-pack by means of specific table, as per Leader requirement
- An Engineer, with a Master's Degree or Higher National Diploma
- 5-10 years in a similar position
- Process Engineering / Oil & Gas Process
- ICAPS / OPERCOM / Commissioning
Interested and qualified candidates should:
Click Here to Apply for this Position
Job Title: Mechanical Technician
Reference Job: 1347
Location: Nigeria
Function: Technical / technicians
Description Job
- To ensure safety of commissioning activities on yard and on site, by performing activities in respect with Company standing instruction and Work Permit instructions.
- To ensure that the work identified in the work permit is performed according to company specification.
- Performed by the commissioning operations (test and check sheets) which are placed under its responsibility.
- Ensure that the COMPANY's HSE regulations are respected (especially procedures related to Work Permits)
- Witnessing of contractor pre-commissioning activities as defined by the supervisor.
- Raise and clear punch List items.
- Report any non-conformity to its Supervisor
- Report any non-conformity to the Supervisor discipline
- Reporting and progress follow up
- Report daily activities to the supervisor
- Minimum Qualification: Technician
- Education Level: High School or Higher National Diploma or Certificate (HND / HNC (A-levels + 3 years' study)
- Experience: 3 years in a similar position
- Mandatory Competencies: English / Mechanical Equipment Test
- Recommended Competencies: Commissioning
- Petroleum: Have a basic understanding of facilities / process (from well to export). Be aware of behavioral hydrocarbons and associated hazards (explosion, asphyxia ...).
- Computer: Be able to produce a report using Microsoft Word; be able to perform simple calculation with Microsoft Excel. Have been introduced to the use of the internet and e-mails.
- Physics: Understanding and use of basic laws and units of physicism (Newton's law, forces, mass, energy ...). Be aware of materials / steels (use, resistance, corrosion and its prevention).
- Be able to read and use drawings (P & ID's, PFD's, Isometrics), vendor documents (be able to determine tolerance and adjustment figures), name name and data sheet.
- Be able to draw accurate sketches and item to scale.
- Understand the working principles of main mechanical equipment: filters, gear boxes, exchangers, air coolers, diesel engines, turbine gas, centrifugal and reciprocating pumps or compressors, common valves (butterfly, gate, ball, cage and PSV) and hydraulic systems ( cranes, HPU, pumps).
- Be fully familiar with lubrication requirements and the different type of lubricants.
- Know how to select, use and maintain all the mechanical hand tools (all types of keys, files, drills, callipers, taps ...).
- Be able to use measuring tools (micrometer, varnish, gauges ...), wrench torque and fastener.
- Be able to operate and maintain pneumatic drills or grinders.
- Be able to use workshop equipment (pedestal drill, hydraulic press ...), in particular machining and tooling.
- Know how to use basic lifting gear (chain block, slings ...). Be trained to complete simple / basic lifting operation.
Interested and qualified candidates should:
Click Here to Apply for this Position
What's your take on this information? We believe this job info was helpful, if yes, do not hesitate to share this information with your friends on Facebook, Twitter, Whatsapp and Google Plus.
No comments:
Post a Comment